Documents/Start mDNSResponder in Xcode.rtfd/TXT.rtf

   1 {\rtf1\ansi\ansicpg1252\cocoartf1504\cocoasubrtf150
   2 {\fonttbl\f0\fswiss\fcharset0 Helvetica;}
   3 {\colortbl;\red255\green255\blue255;}
   4 {\*\expandedcolortbl;\csgray\c100000;}
   5 \margl1440\margr1440\vieww51000\viewh25780\viewkind0
   6 \deftab720
   7 \pard\pardeftab720\partightenfactor0
   8
   9 \f0\fs24 \cf0 \expnd0\expndtw0\kerning0
  10 Instructions on how to run a secondary mDNSResponder in the Xcode debugger.  (Two known issues, the secondary mDNSResponder will not receive unicast mDNS packets and it does not support BTMM.)\
  11 \
  12 1.) From Terminal shell, open mDNSResponder Xcode project. \'a0\
  13 \
  14         $ open mDNSMacOSX/mDNSResponder.xcodeproj/\
  15 \
  16 You can also just double click on the project from Finder.\
  17 \
  18 2.) Configure Xcode Project Scheme by adding the following three arguments, -d -NoSandbox -UseDebugSocket.\
  19 \
  20 \pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardeftab720\pardirnatural\partightenfactor0
  21 \cf0 \kerning1\expnd0\expndtw0 {{\NeXTGraphic A944EB40-AEFD-4CA1-BF10-E8F52835CA8C.png \width18360 \height4420
  22 }¬}\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardeftab720\pardirnatural\partightenfactor0
  23 \cf0 \expnd0\expndtw0\kerning0
  24 \
  25 \pard\pardeftab720\partightenfactor0
  26 \cf0 \
  27 3.) Build and run mDNSResponder by setting the target to mDNSResponder.\
  28 \
  29 \pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardeftab720\pardirnatural\partightenfactor0
  30 \cf0 \kerning1\expnd0\expndtw0  {{\NeXTGraphic Screen Shot 2015-09-16 at 4.22.37 PM.png \width5980 \height660
  31 }¬}\expnd0\expndtw0\kerning0
  32 \
  33 \pard\pardeftab720\partightenfactor0
  34 \cf0 \
  35         Then execute\'a0Command-R to build and run your code with the active scheme.\
  36 \
  37 \pard\pardeftab720\pardirnatural\partightenfactor0
  38 \cf0 \kerning1\expnd0\expndtw0 \CocoaLigature0 4.) Before using dns-sd with Xcode-version of mDNSResponder, make sure to export the socket UDS path by executing one of the following commands:\
  39 \
  40         From a Borne, bash or zsh, execute this command:\
  41 \
  42 \pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardeftab720\pardirnatural\partightenfactor0
  43 \cf0            export DNSSD_UDS_PATH=/var/tmp/mDNSResponder\
  44 \
  45 \pard\tx729\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardeftab720\pardirnatural\partightenfactor0
  46 \cf0    From csh or tcsh, execute this command:\
  47 \pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardeftab720\pardirnatural\partightenfactor0
  48 \cf0 \
  49                 \expnd0\expndtw0\kerning0
  50 \CocoaLigature1 setenv DNSSD_UDS_PATH /var/tmp/mDNSResponder\
  51 \
  52         There may be other variants to setting the environment variable as well for other shells.\kerning1\expnd0\expndtw0 \CocoaLigature0 \
  53 \
  54         Now running dns-sd  will interoperate with the secondary Xcode-version of mDNSResponder as long as you run dns-sd from this terminal shell.\
  55 \
  56 5.) \expnd0\expndtw0\kerning0
  57 \CocoaLigature1 Now set a breakpoint in Xcode and try to trigger it using dns-sd.\
  58 }